Heated Filters
Atmo-Seal Engineering, Inc., manufactures heated filters for use in gas and
diesel sampling; stack and process monitoring. Our heated filters remove unwanted
particulate before it enters your analyzer. Our typical operating range is 450
F, but ranges in excess of 1000 F are available.
Heated
Filters - Bayonet-Type
- Choice of AC 50-60 HZ or DC operation
in a wide range of voltages
- Choice of Thermocouple, RTD, Internal
Thermostat or other sensors
- Housings are available for common filter
sizes (1 X 7, 1 X 2.5, 1/2 x 2.25, 1/2 x 1")
- Easily dis-assembled and repaired in situ if needed
- Filter element may be changed easily by the user
in seconds.
- All Amo-Seal filters arrive Certified Oxygen Cleaned
Click here for PDF
Tough and Adaptable Heated Filters
At Atmo-Seal, Inc. we know how dangerous life can be
for equipment in the field. We kept that in mind when designing our heated
filters.
Our heated filters have exteriors are constructed with aluminum high-temperature phenolic
exterior. All wetted parts are stainless steel and seals are silicone, Viton
(tm)
or Teflon
(tm).
Another unique advantage of our heated filter design is the easy removal and
replacement of the stainless steel filter housing and the port fittings. The
entire filter assembly may be removed from the heater in seconds by simply
removing two screws and fittings. This allows for quick and easy repair in the
field and instant re-configuration of the port fitting types and sizes.
A spare slip-on heater may be kept at
your facility and installed in minutes. This unique feature eliminates downtime
and keeps your testing on schedule.
Our heated filters carry a full 18 month limited warranty, too!
Options
As always, Atmo-Seal, Inc., will customize your
heated filter to your exacting specifications WITHOUT jeopardizing your delivery
schedule.
Replacement Filter Elements
Atmo-Seal Offers replacement filter elements for Diesel, Gasoline and Stack
Monitoring.
Disposable Elements
for Gaseous Testing:
1" ID x 7" Long Element (box of 10)
EPT-7/1
1" ID x 2-1/2" Element (box of 10) EPT-2.5/1
1/2" ID x 2.25"
Long Elements (box of 10) EPT-2.25/.5
1/2" ID x 1" long Elements (box of 10)
EPT-1/.5
Standard replacement elements are all 95% @ .01 micron. This and other ranges are in stock and ready for immediate shipment.
We also carry metal sintered and stainless steel mesh filter elements for cleaning and re-use.